Originally published on YouTube on May 20, 2022
Overview and installation of the Darksoft CPS1 Multi, which allows you to play all the CPS1 and 1.5 (QSound) arcade games from one board. The passive heatsink I use on the CPS1-A-01 custom chip is 22x22x10mm in size.
The written manual for the CPS1 Multi is available on the Arcade Projects forum here: https://www.arcade-projects.com/threa…
Here is the link for FAT Sorter program: https://www.softpedia.com/get/System/…
IMPORTANT: I discovered that I installed the Reset and QSound wires backwards in this video. Use whichever wire is longer in your kit for the Reset function.
0:00 – Multi Kit Contents
1:46 – Donor Game PCB Overview
5:10 – Donor A-Board Overview
9:05 – Q Sound Overview
11:58 – Donor C-Board Overview
13:09 – Step 1: Donor Functionality Check
14:15 – Step 2: Remove Donor B and C Boards
14:39 – Step 3: Solder Reset Wire to A Board
15:55 – Step 4: Solder QSound Wire to A Board
16:28 – Step 5: Swap PAL Chip
19:04 – Step 6: Attach C Board to Multi Board
20:07 – Step 7: Attach Spacers to Multi Board
20:59 – Step 8: Turn off all DIP Switches on A Board, Attach Multi Board to A Board and Connect Wires
23:00 – Step 9: Attach Filter JAMMA Board
24:09 – Step 10: Install Fingerboard into Filter JAMMA Board
25:52 – Step 11: Connect LCD Selector to Multi Board
27:08 – Step 12: Formatting MicroSD card
28:46 – Step 13: Copy Games to MicroSD card and run FAT Sorter
30:05 – Final checks, Power On and Multi Functionality Review
34:26 – Troubleshooting Advice