Category: Repair
-
Namco NB-2 Outfoxies arcade PCB #2
Status: Successfully Repaired on 4/16/2022 In for repair was a Namco Outfoxies arcade board. The game booted up and played fine with one player, but in two player mode Left, Down, and Button 1 wouldn’t work for Player 2. Tracing the Player 2 control signals from the JAMMA connector, I discovered that they stopped almost…
-
Taito G-Net arcade PCB
Status: Successfully Repaired on 1/31/2022 I’ve had a Taito G-Net board sitting in the repair queue for a few months, and I finally tackled it this weekend. This board had an issue where Coin 1 was shorting to Ground, causing games to constantly reboot with a Coin Error message. Enabling DIP Switch 4 lets you…
-
Konami Teenage Mutant Ninja Turtles arcade PCB
Status: Repaired successfully on 6/16/2022 In for repair was a Teenage Mutant Ninja Turtles board. The owner reported that the game would boot up and run, but the background would turn blue after a while. For me, it wouldn’t start up past the Self Check, but it did have a blue background. The Self Check…
-
Irem M92 arcade PCB
Status: Diagnosed from 11/28/2022 – 12/7/2022. Successfully repaired with new Nanao custom on 9/10/2023. I got a good deal on a Gun Hohki Irem M92 PCB because it booted up with errors. On M92, the main CPU, graphics rendering hardware, sound synth, sound amp, system RAM are all on the top board. The bottom board…
-
Irem M72 arcade PCB
Status: Repaired Successfully Between 4/26/2021 – 6/22/2021 Received for repair this Irem M72 board stack labeled as Legend of Hero Tonma. It would boot to a corrupted screen. Checking around the EPROMs, I noticed two things immediately:1) The ROMs and MCU are labeled for Image Fight, not Tonma.2) Some of the ROMs were installed in…